? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 4121, rev. b power schottky rectifier very low voltage drop (s-100 for jantxv equivalent screening and ss for jans equivalent screening is available) description: a 60 volt, 120 amp, power schottky rectif ier in a hermetic s hd-3/3a/3b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 60 volts maximum dc output current (w ith cathode ma intained @ t c =100 o c) i o 120 amps maximum nonrepetitive forward surge current (t=8.3ms, sine) i fsm 1650 amps maximum junction capacitance (v r =5v) c t 5000 pf maximum thermal resistance (juncti on to mounting surface, cathode) r jc 0.20 c/w maximum operating and storage temperature range top/tstg -65 to + 175 c electrical characteristics characteristic symbol max. units maximum forward voltage drop, pulsed (i f = 120 amps) t j = 25 c t j = 125 c v f 0.79 0.72 volts maximum reverse current (i r @ 60v piv) t j = 25 c t j = 125 c i r 3 180 ma shd114623 shd114623a shd114623b
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 4121, rev. b mechanical dimensio ns: in inches / mm pinout table type pin 1 (base) pin 2 single rectifier cathode anode note: the vf curves are for unpackaged die only typical reverse characteristics 0 102030405060 reverse voltage - v r (v) 10 -2 10 -1 10 0 10 1 10 2 10 3 instantaneous reverse current - i r (ma) 125 c 100 c 75 c 50 c 25 c 0.0 0.2 0.4 0.6 0.8 forward voltage drop - v f (v) 10 -1 10 0 10 1 10 2 instantaneous forward current - i f (a) typical forward characteristics 125 c 25 c 1500 2000 2500 3000 3500 4000 4500 junction capacitance - c t (pf) 0 102030405060 reverse voltage - v r (v) typical junction capacitance shd114623 shd114623a shd114623b .200.010 (5.08 .254) .410.010 (10.4.254) .075 (1.91) max alumina ring .410.010 (10.4.254) .550.020 (14.0.508) moly lid moly base (cathode) .060.010 ( 1.52.254 ) .020.002 (.508.051) .020.005 r (.508.127 ) moly anode .075 (1.91) max .410.010 (10.4.254) moly lid mol y base .410.010 (10.4.254) alumina ring .090 (2.29) max alumina ring moly base (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .410.010 ( 10.4.254 ) .150.010 ( 3.81.254 ) . 560 . 020 (14.2.508) .410.010 ( 10.4.254 ) .015.005 (.381.127) co pp er anode shd-3 shd-3a shd-3b
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 4121, rev. b shd114623 shd114623a shd114623b disclaimer: 1- the information given herein, including the specifications and dimensions, is subj ect to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear powe r control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensur ed by using semiconductor devices that feature assured safety or by means of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitr on semiconductor assumes no responsibility for any intellectual prope rty claims or any other problems that may result from applications of in formation, products or circui ts described in the datasheets. 4- in no event shall sensitron semiconducto r be liable for any failure in a semicond uctor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or a ny third party. when exporting these products (tec hnologies), the necessary procedur es are to be taken in accordance with related laws and regu lations.
|
